Встроенный сверхтонкий круглый алюминиевый потолок IP54 smd 18 ватт светодиодная панель

Описание

Встроенный сверхтонкий круглый алюминиевый потолок IP54 smd 18 ватт светодиодная панель

Функции

LED Panel has been design to work with conventional Grid Panel Light with fluorescent tube fixtures. To replace the short lived fluorescent lamps that are typically used in interior lighting.The LED Panel can be used to retrofit existing fluorescent tube grid light installations in all types of applications.

1.material is aluminum
2.Flexible Voltage: Use led ceiling lamp in AC85-265V voltage
3.Good heat dissipation by unique heat-sink design
4.Green and health protection,отсутствие загрязнения,удобнее для нашего зрения

 

Технические детали

Тип вещи:	Slim Round led panel light
Diameter(мм):	225мм (hole 200mm) Thickness 25mm
Тип светодиода:	0.2W SMD2835
Количество светодиодов:	90шт
Входное напряжение(В):	AC85-265В(12V/24V can be optional)
Энергопотребление:	18Вт
Светящийся :	1800лм
Light Luminous Efficiecncy:	100лм/Вт
Рабочая температура:	-20-+40 степень
Температура хранения:	-40-+85 степень
IP-рейтинг:	IP44
ЦРИ:	>80 Ра
ССТ:	3000K 4000K 5000K 6000K
Угол луча :	>110 °
Light Body Matrial	Алюминий
Working Lifespan:	50,000 Часы
Сертификат:	CE ,Rohs ,TUV EMC
Гарантия:	3 Годы

Приложения

аэропорт, Ванная, Ванная комната, Спальня, Автостоянка, Церковь, Кинотеатр, Галерея, Госпиталь Музея «Гараж», Гостиница, Кухня, Конференц-зал, музей, Офис, Ресторан, Школа, Shopping Mall, Sitting Room

 

Монтаж

Attention on Installation

1. Panel lights should be installed by trained electronic technician.
2. Please check all the accessories when open the cartons.
3. The distance between the light and any flammable materials must be more than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 2 см. Don not install into ceilings or walls that contain heat source. The main cable must not connect with the low voltage cable or the surface-mounted lights.
4. Guide the lights’ connecting cables through the drilled hole, and fix the surface-mounted lights with the pre-fitted clips. Make sure that these are securely connected to the base material.
5. When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces. Do not kink cables. Output cables should be laid separately and at a distance from other cables.
6. After installation, connect the transformer to the mains supply
7. Proceed by connecting the wiring cables to the lights. Usually, the brown (or black) wire is the Live wire, connect it with the terminal marked “л”. The blue wire is Naughty wire; connect it with the terminal marked “Н”.
8. Use the dedicated LED drivers only, do not connect to other loads
9. Do not remove the label of the lights and drivers.

Упаковка & Перевозки

Стандартная экспортная упаковка, цветная коробка или нейтральная белая коробка