AC85-265V Luz de teto levou lâmpada fluorescente batten fitting 18w 4ft luminária
Tensão de entrada AC85-265V
Luminária de teto led luminária fluorescente
Batten Fitting 18W 4ft luminária
3 ano de garantia
- Descrição
- Contato de
Descrição
AC85-265V Luz de teto levou lâmpada fluorescente batten fitting 18w 4ft luminária
Características
LED Tube replacement is the best choice for you to replace your old fluorescent T8 tube to clean,efficient LED technology.MINSENS has the best prices on LED T8 Tube lights,with good quality.Offering more than 80% energy saving and lower maintenance costs.Upgrade to LED Tube technology today!
1. Support trade assurance orders
2. High power factor ≥0.95,THD<15%
3. Luz: Epister 2835 smd LED
4. Alta eficiência, até 130 lm/W
5. High CRI: Rá>80
6. Viewing angle: 120-180grau
7. Tensão: AC85-265V
8. Cor(CCT): W=3045±175K, N=3985±275K, D=5028±283K
9. Aluminum base for good heat dissipation of LEDs
10. garantia: 3 anos.
11.Approved by UL,RoHS,CE
Detalhes
Detalhes técnicos
| Modelo | Comprimento | LED type | Quantidade de LEDs | Tensão | Watts | Lumens | CRI | THD | PF |
| MS-T8-600 | 600milímetros | SMD2835 | 60 | AC100-277V AC277-347V | 9C | 1080lm | >80 | <20% | >0.95 |
| MS-T8-900 | 900milímetros | SMD2835 | 96 | AC100-277V AC277-347V | 14C | 1680lm | >80 | <20% | >0.95 |
| MS-T8-1200 | 1200milímetros | SMD2835 | 120 | AC100-277V AC277-347V | 15C | 1800lm | >80 | <20% | >0.95 |
| 18C | 2160lm 2640lm | ||||||||
| 22C | |||||||||
| MS-T8-1500 | 1500milímetros | SMD2835 | 144 | AC100-277V AC277-347V | 22C | 2640lm | >80 | <20% | >0.95 |
| MS-T8-1800 | 1800milímetros | SMD2835 | 192 | AC100-277V AC277-347V | 26C | 3120lm | >80 | <20% | >0.95 |
| MS-T8-2400 | 2400milímetros | SMD2835 | 240 | AC100-277V AC277-347V | 36C | 4320lm | >80 | <20% | >0.95 |
Formulários
1.Sala de estar, quarto, cozinha, banheiro;
2.Escola, university, hospital, hotel;
3.Conferência, sala de reuniões, show room, showcase;
4.Commercial complexes;
5.Fábrica, plantar, armazém, escritório;
6.Supermercado, loja de departamento;
Installation of LED Tube Light
The same size tube can be installed on to the corresponding lamp holder directly before taking down fluorescent lamp starter.
1. LED tube can be directly installed into T8 or T10 bracket(take down fluorescent lamp starter);
2. LED tube light apply to inductive light holder. Electronic ballast fluorescent tube can’t be replaced directly. Should take down electronic ballast.
Embalagem & Envio
Embalagem padrão de exportação, caixa de cor ou caixa branca neutra
